Gain Accuracy:

±1.0dB

Gain Slope:

<0.7dB / 36MHz

Receiver Gain Adjustment Range (gain adjust option only):

±3dB

Gain Stability over Temperature Tx Rx:

<0.05dB/°C typ.

Input Third Order Intercept @ 1.2GHz:

>+7dBm

Input P1dB @ 1.2GHz:

>-3dBm

‐13dBm

Noise Figure @ 1.2GHz:

<36dB, 0dB optical loss @1.2GHz <44dB, 12dB optical loss@ 1.2GHz

Carrier to Noise Ratio @ 1.2GHz 1MHz bandwidth, ‐40dBc IMD:

>65dB for 0dB optical loss >57dB for <12dB optical loss

Input/Output Impedance, VSWR:

50W, VSWR < 1.5 : 1 (14dB min.)

Transmitter Alarm Output:

Monitors laser back‐monitor photocurrent and laser diode forward current. Open collector alarm is raised when laser health is degraded.

Receiver Alarm Output:

Monitors received light level. Open collector alarm is raised when optical loss reaches 20dB.

Open Collector Alarm Rating:

+15V max. 500mA max.

Transmitter Monitor Output:

Analogue measurement of laser diode forward current (IFL). This analogue output voltage monitors the efficiency of the laser diode. VIFL = 68 x I fwd (A).

Receiver Monitor Output:

Analogue measurement of received light level (RLL). The VRLL is set to give +7.75V when link gain is +9dB=, and varies by 0.125V/dB of RF link gain when the gain is reduced by optical path losses.

Monitor Output Range:

+12V max. 0V min., maximum load 10ký

RF Connector:

Optical Connector:

Suhner E2000 single mode anglepolished connector FLSH‐2000‐A608

LNA Feed:

±36V max. 330mA max. via RF centre conductor

Current Consumption:

Rx < 150mA, Tx < 180mA

Absolute Maximum RF Input (Tx):

>+15dBm, 5Vdc

Operating Temperature:

-10°C to +50°C

Storage Temperature:

-40°C to +70°C

Wavelength:

1310 ±20nm

Output Power:

+4.5dBm/3mW nominal